11/ 23/ 04 We received our instructions and we are deciding on what we want our robot to do. We decided to put on a light sensor. 11/ 30/ 04 We started building out robot today. We are making our robot go faster.   12/ 3/ 04 We are now deciding on a name and were having trouble agreeing. Now we decided on our name. Our robot's name is AEJJT. We want our robot to draw its name in script. 12/ 7/ 04 Today we are making it drive slowly with more power. We changed our mind about what it's going to do. 12/ 14/ 04 We are trying to put the wheels on and the motors on. Michael Magner helped us put the wheels and the motor on. 12/ 21/ 04 We are still putting on the wheels. Now we finally got the wheels on. 1/ 7/05 Today we started programming our robot. 1/ 14/ 05 We put longer axels on. Then we made it go strait and then turn a little bit. 1/ 21/ 05 Mr. Cattanach put a wheelie stopper on to prevent it from doing a wheelie. We made it smaller because it was too long. Now we added a front wheel. 1/ 21/ 05 Today we tried to get our robot to turn. We are trying to get it to go straight turn and come back. We finally got it to work, but we have to adjust some things because it goes crocked. Now the robot is turning in circles when it is supposed to go straight. We don't know how it happened. 1/ 28/ 05 Today we tested out our robot but it still goes crooked and we tested it out, but we were holding it the wrong way and it broke. We put it back together, but it goes in a circle. 2/ 4/ 05 Today our robot is doing fine, but we want it to move faster. I think we are going to leave it the way it is. The reason why we are going to leave it the way it is because it is doing what we want it to do. Now we decided to make an optical for our robot and we will work on that next week. 2/ 8/ 05 Today, there was a problem with the gearing. We're still looking for the problem. After we find it, we will have to find an answer. 2/ 11/ 05 Today we are going to make our robot do a wheelie it originally did that but we took off the Lego that made it not do a wheelie. We did this because ours didn't have a lot of features so we thought it would look cooler. Our robot goes forward for a few seconds then turns around once and comes back to us. The Last Week Today we are separating the kit for our robot. We are done. Our Program to Aejjt asetpower 8 csetpower 8 cthisway aon con wait 110 coff aon athisway wait 12 aon con wait 110 beep beep aoff coff end   Our robot beeps goes straight and turns and comes back to us. Then, when it's done it beeps.