Dragon2000 By Eric, Karina,Kyla,Sarah,Shawn   Week One: Powerful, fast, and smart is what we plan to do. We decided to make it 2*2 wheel drive. Week Two: Put in the light sensor and try to make a plan on how we will put it together, we put the light sensor in the back because if it bumps into something it can reverse. We are starting to attach the motors, and adding the touch senser.Now the motors are on. Week Three: Now by putting on the finishing touches we put on plastic wings, so it will look nice. The last thing is we will tighten everything up so it will not fall apart. First we tightened up the wheels tighter so they are sturdier.Aswe get closer to finishing up we take the engine and make it titer to. We make a beep test to make sure everything is okay. It didn't work out so well but we'll try again. Week Four: We tried and tried to make the wheels work but they just didn't. Then we tried and it worked our wheels went faster. We never succeed with putting on the touch sensor but we tried once and it was actually working. Mission Complete!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!   to dragon2000 aon con wait 30 aoff con wait 20 con aon wait 30 waituntil [switch3] coff wait 20 con wait 20 end   What the Dragon 2000 Does What the Dragon 2000 does is it evolves from a teenager to a grandpa. In other words, it goes fast to slow, fast to slow. Also it has a touch sensor that when it hits a wall, it will back up, turns left, and goes forward. Our robot is very smart. It is like human being. If it speeds, it will slow down. It is like when it speeds it gets pulled over and it speeds up.