We decided to have the back the back wheels higher than the front.
We started to build X7. We also decided to use light sensors.
We encountered a problem, too. We forgot to put the gears on.
Now were starting from scratch using everybody's idea.
We found out how to use gears! So now we're, putting them on. We have the gears on, but we need to put the motors on. We decided to use the book to get ideas.
We changed our idea about the book. We even got the gears to work!! Now we're putting it together!! It's not going together as we hoped, so we took off one gear.
We changed it AGAIN but X7 keeps falling apart. We finally got the wheels to stay on and it WORKED!!!! Now we are programming it and it is running well. The programming is fun because our group is working together.
Our group can't get it to turn. Now, we got it to do a wheelie. We hope that next week we will be able to fix the turn.
This week we fixed the turn. It still does
the wheelie. It spins a lot. From last week we put in a wheelie
bar on it. We also have it go very fast.
You never know were it's going to go.
Our Program
to X7
Rd
setpower 12
ac, thatway
rd
setpower 12
beep
rd
ac, onfor 20
beep
repeat 3[a, onfor 20 wait 4]
setpower 10
rd
ac, onfor 40
beep
ac, onfor 20
setpower 12
beep
rd
setpower
repeat 3[c, onfor 20 wait 4]
rd
setpower 10
ac, onfor 15
rd
setpower 12
rd
setpower 12
rd
beep
ac, onfor 10
rd
ac, onfor 20
rd
setpower 12
repeat 3 [c, onfor 20 wait 4]
setpower 12
ac, onfor 10
rd
ac, onfor 20
rd
beep
setpower 12
ac, onfor 20
rd
ac, onfor 20
c, onfor 10
a, onfor 10
end